2021 Raptor Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)

2021-2024 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)

F210014110103

$2,449.98

Estimated 2-4 Week Lead Time

  • Requires Adaptive Cruise Control relocation bracket for adaptive cruise control equipped vehicles
  • Hammer black powder coat finish
  • Satin black powder coat panel finish
  • Mounts for 4 RIGID 360 6” lights
  • Mounts for cube lights on sides
  • *Will fit Raptor R

Install Instructions

PRODUCT DESCRIPTION

The ADD Offroad Bomber Front Bumper for the Ford Raptor & Raptor R has been the king of aftermarket Raptor bumpers for years. We’ve brought the Bomber to the 3rd-gen Raptor, keeping it true to it’s low-profile, aggressive styling. Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck’s front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper.

The Bomber Raptor Front Bumper is offered with three lighting options: 4 Rigid 360 6-inch light mounts, 3 Baja Designs LP6 light mounts, or two 20-inch light bar mounts. Additionally, there are cube light mounts on each wing of the bumper to provide supplemental lighting options. The Bomber retains both the OEM tow hooks as well as the OEM parking sensors. As always, this bumper is fully bolt-on and Made in America.

The bumper is finished in a hammer black powder coating, while the aluminum panels and skid plate are finished in a black satin powder coat.

Features

  • Modern plate steel design
  • Full 3/16” aluminum skid plate
  • Weighs less than the OEM front bumper
  • Mounts for 4 RIGID 360 6” lights
  • Retains OEM tow hooks
  • Retains OEM parking sensors
  • Fully bolt-on
  • Made in America

Add on our Adaptive Cruise Control Relocation Bracket to maintain full use of your F-150’s ACC capabilities. 

We include a shutter motor bracket with your bumper. However, if you previously purchased this bumper and need a shutter motor bracket, you can find it here.

Model

2021-2023 Ford F-150 Raptor & Raptor R

2024+ Ford F-150 Raptor

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Low Profile
  • Center Lights
  • Side Lights
  • OEM Sensors

Low Profile

Not only does the bumper fit flush to the front of the truck, but it follows the valance and fender bodylines perfectly. No matter what angle you view it from, you will be impressed.

Center Lights

This bumper has center mounts for 4 RIGID 360 6” lights

Side Lights

You can mount a cube light behind each side panel of the bumper.

OEM Sensors

The bumper was designed to retain the OEM parking sensors in equipped models.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.