2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper
2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper

2021-2024 Ford F-150 Raptor/Raptor R ADD Pro Bolt-On Front Bumper

F218102070103

$2,999.98
In Stock & Ready to Ship!
  • Requires Adaptive Cruise Control relocation bracket for adaptive cruise control equipped vehicles
  • Hammer black powder coat finish
  • Satin black powder coat panel finish
  • Universal light mount for up to 6 cube lights or 20" radius light bar
  • Optional add-on light hoop that holds four 6" round lights

Winch kit will not fit 2024+ Raptor or any year Raptor R

*With additional light hoop installed, the reverse braking assist feature will turn off and a warning message will be displayed on your dash

*With additional light hoop installed, front parking sensors may become inactive

*With additional light hoop and lights installed, front camera visbility will be hindered

Install Instructions

PRODUCT DESCRIPTION

The Pro-Bolt On Front Bumper for the 2021-2024 Ford Raptor & 2023 Raptor R is our slimmest fitting bumper, and was designed in a prerunner style. The main radius .120-inch wall steel tube closely follows the contours of the front end and sits flush with the grille/valance. It features an 1/8-inch aluminum skid plate that is vented to ensure proper airflow reaches the OEM intercooler. This bumper allows you to keep the intercooler in its original position.

At the center of the bumper is a universal light mount with a couple of lighting options. Up to 6 cube lights, or a 20-inch radius LED light bar can be mounted here. The lights are protected from impact by the lower steel tube & skid plate, as well as side steel plating.

We offer the optional ADD PRO Bolt-On Light Hoop if you'd like even more supplemental lighting on the trail in low-light conditions. The hoop can mount up to four 6-inch round lights. Manufactured from the same .120-inch steel wall tubing, the hoop maintains the same low-profile styling as the bumper itself. As always, this Raptor bumper is fully bolt-on and Made in America.

We include a shutter motor bracket with your bumper. However, if you previously purchased this bumper and need a shutter motor bracket, you can find it here.

Features

  • Tightly follows the contours of the front end
  • Low profile
  • Retains OEM intercooler location
  • Light mounts for up to 6 cube lights or a 20" radius LED bar
  • .120" wall steel tubing
  • CNC cut aluminum skid plate
  • Optional light hoop
  • Made in America

ADD Raptor Pro Bolt-On Winch Kit

This conversion kit enables your 3rd Gen Raptor Pro Bolt-On Front Bumper to accommodate a winch, so you can be prepared for any recovery situation. The winch mount bolts directly to the truck's frame for maximum strength, and is concealed behind the winch plate for a clean look. Simply select this option from the drop-down menus to add it to your cart.

** Winch kit will not fit 2024+ Raptor or any year Raptor R

Raptor Winch Kit

Model

Trim

2021-2023 Ford F-150

Raptor and Raptor R *Winch Kit does not fit Raptor R

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Light Hoop
  • Center Lights
  • Fit & Finish
  • OEM Intercooler

Light Hoop

This bumper can be paired with the optional light hoop, providing both extra protection and more lighting options.

Center Lights

The bumper is designed to be able to mount up to 6 cube lights or a 20" radius LED bar.

Fit & Finish

We design our bumpers to have the best fit & finish on the market, ensuring our bumpers not only look great, but are made to last. After sandblasting, we apply a hammer black powder coat finish across the entire bumper.

OEM Intercooler

The bumper was designed to retain the OEM intercooler position.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.