2023 Ford F-250/350 Phantom Winch Front Bumper
Phantom Winch Front Bumper for the 2023 Ford F-250/350
Phantom Winch Front Bumper for the 2023 Ford F-250/350 with lighting options and winch
Perfect fitment of the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Low-front angle of the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Front corner angle of the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Recessed Light Bar mounting point for the Phantom Winch Front Bumper for the 2023 Ford F-250/350
ADD Phantom Winch Front Bumper for the 2023 Ford F-250/350 fits the bodylines
Rigid Lightbar on the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Clevis mounting points on the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Capture Fairlead on the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Warn Winch installed with the Phantom Winch Front Bumper for the 2023 Ford F-250/350
10 inch side lights on the Phantom Winch Front Bumper for the 2023 Ford F-250/350
Accessing the winch on the Phantom Winch Front Bumper for the 2023 Ford F-250/350

2023-2024 Ford F-250/350/450 Phantom Winch Front Bumper

F810335070103

$2,899.98

Estimated 2-4 Week Lead Time

Knife’s Edge Design 

  • Fits Standard Warn Winches 
  • Fits a 20” Radius LED Light Bar 
  • Fits Two 10” SR LED Light Bars 
Install Instructions

PRODUCT DESCRIPTION

Our Phantom Series Super Duty Winch Front Bumper features seamless styling & utility that is the highlight of your build. A modular hidden winch mount sits behind satin black accent plates, and can fit all standard Warn winches (will not fit Zeon Series). 1-inch thick clevis mounts that take ¾-inch D-rings provide even more recovery options. A recessed universal light pocket provides options for either a 20-inch light bar or (6) 3-inch light pods. Additionally, each wing of the bumper features mounting points for 10-inch SR light bars. 

A 3/16-inch heavy duty aluminum skid plate offers lower front-end protection. OEM parking sensors are integrated into the bumper’s design, ensuring you retain full functionality of the feature. The adaptive cruise control feature is also retained when relocated to the grille with our Super Duty ACC bracket. The bumper is finished in a durable 2-stage hammer black powder coat and features a fully bolt-on installation. As always, this is proudly made in America. 

Features: 

  • Knife’s Edge Design 
  • Low-Profile Fitment 
  • 20” Light Bar Mount 
  • (2) 10” Single Row Light Bar Mounts 
  • Plate Steel Construction 
  • 3/16” Full-Size Removable Aluminum Skid Plate 
  • Extreme Duty Recessed Hidden Winch Mount 
  • Fits All Standard Warn Winch Offerings (Will Not Fit Zeon Series Winches) 
  • 1” Thick Clevis Mounts for D-Ring Shackles 
  • Retains OEM Parking Sensors 
  • Retains Adaptive Cruise Control with our Relocation Bracket 
  • Hammer Black Powder Coat Steel 
  • Satin Black Powder Coat Aluminum Accent Panels 
  • Fully Bolt-On Installation 
  • Made in the USA

Model

Trim

2023-2024 Ford Super Duty

F-250, F-350, and F-450

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Fit & Finish
  • Center Light
  • Side Lights
  • Winch Ready

Fit & Finish

We design our bumpers to have the best fit & finish on the market, ensuring our bumpers not only look great, but are made to last. After sandblasting, we apply a hammer black powder coat finish across the entire bumper.

Center Light

Our universal light mount system allows the use of any brand 20-inch light bar in the center of the bumper. Alternatively, there are mounting solutions for up to 6 3-inch cube lights in that section.

Side Lights

You can snuggly fit a 10-inch single row light bar behind each side panel of the bumper. The panels are open to let light pass through.

Winch Ready

The Phantom Winch Front Bumper was designed to allow for a concealed winch at the front of your vehicle.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.