2021 Ford Bronco Front Bumper
2021 Ford Bronco Front Bumper
Off-Road Bronco Bumper
2021 Ford Bronco Front Bumper
Aftermarket Bronco Bumper
2021 Ford Bronco Front Bumper
Off-Road Bronco Bumper
2021 Ford Bronco Front Bumper
Aftermarket Bronco Bumper
2021 Ford Bronco Front Bumper

2021-2024 Ford Bronco Stealth Fighter Front Bumper

F230142210103

$2,099.98

Estimated 2-4 Week Lead Time

  • Hammer black powder coat finish
  • Satin black powder coat panel finish
  • Mounts for 30-Inch Radius Light Bar and 2 Cube Lights

Install Instructions

PRODUCT DESCRIPTION

For those who are looking for a sleek, low-profile front bumper for their 2021 Bronco, the Stealth Fighter hits the mark. Designed for performance and clearance off-road, it also brings bold styling to the front end. At the center of the bumper are inset mounting points for up to a 30-inch radius light bar, or 8 cube lights. Towards the ends of the bumper are 2 additional inset mounting points, that can take a cube light each. This design retains the OEM parking sensors, and we include plugs if your model does not have sensors. Our adaptive cruise control relocation bracket is available as well.

The bottom panel features louvers to allow airflow to the intercooler. We designed a 3/16-inch aluminum skid plate to replace the factory plastic skid plate. This is an optional feature, as you can retain the factory skid plate with the Stealth Fighter bumper. There are 2 reinforced clevis mounts that accept soft shackles, that provide recovery options if you manage to get stuck in the mud, sand, or snow. As always, this Bronco front bumper is fully bolt-on and Made in America.

Features

  • Low Profile Radius Plate Steel Design
  • Universal Light Mount for Up to 30-Inch Radius Light Bar or 8 Cube Lights
  • One Cube Light Mount Behind Each Side Panel
  • Optional 3/16" Aluminum Skid Plate
  • OEM Skid Plate Will Fit (Trimming Required)
  • Vented Lower Panel with Louvers for Intercooler Airflow
  • Retains OEM Parking Sensors, and Includes Plugs for Non-Sensor Models
  • Reinforced Clevis Mounts Accept Soft Shackles
  • Adaptive Cruise Control Relocation Bracket Available Separately
  • Fully Bolt-On
  • Made in America

Model

Trim

2021-2024 Ford Bronco

All Trims

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Vented Panel
  • Center Light
  • Side Lights
  • OEM Sensors

Vented Panel

The bumper featured a vented lower panel with louvers for intercooler airflow.

Center Light

Our universal light mount system allows the use of any brand 30-inch light bar in the center of the bumper. Alternatively, there are mounting solutions for up to 8 cube lights in that section.

Side Lights

You can snuggly fit a cube light behind each side panel of the bumper. The panels are open to let light pass through.

OEM Sensors

The bumper was designed to retain the OEM parking sensors in equipped models. Plugs are included for non-equipped models.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.